50441
50441 - scheinder
closed toroid A type, for Vigirex and Vigilhom, SA200, inner diameter 200 mm, rated current 400 A
stock :7
Description
This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 400A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 200 millimeters and the weight is 1.320kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 100 millimeters. The maximum cross section per phase (R, S, T, N) is 2 cables of 185mm² for a copper conductor.
Specifications Main
Main Range VigiPacT Device short name SA200 Product or component type Earth leakage current sensor Device application Equipment monitoring and control Range compatibility VigiPacT RH10M residual current protection relay
VigiPacT RH10P residual current protection relay
VigiPacT RH21M residual current protection relay
VigiPacT RH21P residual current protection relay
VigiPacT RH68M residual current protection relay
VigiPacT RH86M residual current protection relay
VigiPacT RH86P residual current protection relay
VigiPacT RH99M residual current protection relay
VigiPacT RH99P residual current protection relay
VigiPacT RH197M residual current protection relay
VigiPacT RH197P residual current protection relay
VigiPacT RHU residual current protection relay
VigiPacT RHUs residual current protection relay
VigiPacT RMH residual current protection relaycurrent sensor type A type closed toroid [Ie] rated operational current 400 A Complementary and Environment
Complementary Transformer ratio 1/1000 network type AC/DC network frequency 45...440 Hz [Icw] rated short-time withstand current 85 kA for 0.5 s Residual short-circuit withstand current 85 kA / 0.5 s conforming to IEC 60947-2 [Ui] rated insulation voltage 1000 V Overvoltage category IV [Uimp] rated impulse withstand voltage 12 kV Mounting mode Fixed (cables)
Fixed (plain backplate)
Fixed (profiled sheet metal)
Fixed (slotted backplate)Calorific value 7.05 MJ Connections - terminals Screw connection 0.22 mm² Diameter 196 mm inner: Cable outer diameter 100 mm for 2 cables : 185 mm² (maximum) Net weight 1.32 kg Height 256 mm Width 274 mm Depth 46 mm Environment IP degree of protection Connectors: IP20
IP30Environmental characteristic Exposure to damp heat not in service (25...55 °C, RH 95 %) : 28 cycles conforming to IEC 60068-2-30
Salt mist: Kb/2 conforming to IEC 60068-2-52
Exposure to damp heat in service: category C2: 48 hours conforming to IEC 60068-2-56Pollution degree Level 3 conforming to IEC 60664-1 Ambient air temperature for operation -35…70 °C Ambient air temperature for storage -55…85 °C Standards IEC 60947-2 Product certifications CE Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Height 7.500 cm Package 1 Width 27.000 cm Package 1 Length 28.400 cm Package 1 Weight 1.100 kg Unit Type of Package 2 S04 Number of Units in Package 2 12 Package 2 Height 30.000 cm Package 2 Width 40.000 cm Package 2 Length 60.000 cm Package 2 Weight 13.800 kg Unit Type of Package 3 P12 Number of Units in Package 3 48 Package 3 Height 50.000 cm Package 3 Width 80.000 cm Package 3 Length 120.000 cm Package 3 Weight 67.864 kg